CH-TR-204-01 / DRAFT 0.1
Guard reference and configuration review
Concept training draft — not an approved plant operating SOP
Model CHEM-P204-01 v0.1

Use only the fictional inert model. A task owner must validate source, revision, mechanics and evidence before any real-equipment lesson. This page does not authorize physical work.

01. Establish the training boundary
Action: Confirm that this is the fictional inert P-204 concept model.
Check: No plant work or operating authority is implied.
Components: P-204

02. Check the source and revision
Action: Read model CHEM-P204-01 v0.1 and this draft identifier.
Check: The model and procedure versions match.
Components: P-204

03. Orient the assembly
Action: Locate the blue pump, grey motor and stationary coupling in 3D.
Check: Pump left, motor right; coupling remains stationary.
Components: P-204, M-204, C-204

04. Identify the correct guard
Action: Select G-204-A and compare its identity with the equipment record.
Check: G-204-A is distinct from the separate G-205-B spare.
Components: G-204-A, G-205-B

05. Compare the mounting footprint
Action: Orbit the model and inspect the correct guard feet and fixed recessed pads.
Check: All four intended mounting locations are identifiable; geometry is illustrative.
Components: G-204-A

06. Locate the front pair
Action: Select CG-01, then CG-03, using the part picker or model.
Check: Both front identities are recorded separately.
Components: CG-01, CG-03

07. Inspect the rear pair
Action: Orbit to inspect CG-02 and CG-04.
Check: A front image is not treated as rear fastening evidence.
Components: CG-02, CG-04

08. Distinguish retained parts and tools
Action: Inspect the captive groups and separate keyed tool geometry.
Check: No threads, applied torque or continuous tool transfer are claimed.
Components: CG-01, CG-02, CG-03, CG-04

09. Explore assembly ownership
Action: Use the exploded inspection view to see which parts belong to the guard assembly.
Check: The view is an illustration of grouping, not an approved removal sequence.
Components: G-204-A, C-204

10. Restore the assembled inspection view
Action: Reassemble the viewer and compare the source again.
Check: Correct guard identity and mounting context remain consistent.
Components: G-204-A

11. State the review decision
Action: Describe whether the supplied concept references are sufficient for the training example.
Check: Any unverified fit, clearance or retention requirement remains a review item.
Components: G-204-A

12. Prepare the receiving handover
Action: Link the configuration review to the receiving evidence draft.
Check: Guard review alone is not an operational release or a complete line-up record.
Components: P-204, L-204-D

ASSESSMENT
Assess identity, front/rear pair recognition and the explanation of source limits. A simulated configuration score does not establish real fastening or readiness.

Draft for review and future Genesis authoring; not a published Chemicals simulator.