Guard reference and configuration review

CONCEPT TRAINING DRAFT · NOT AN APPROVED PLANT OPERATING SOP

Use only the fictional inert model. A task owner must validate source, revision, mechanics and evidence before any real-equipment lesson. This page does not authorize physical work.

Model CHEM-P204-01 v0.1 · 12 steps · authored for review

1. 01

   Establish the training boundary

   Confirm that this is the fictional inert P-204 concept model.

   Check No plant work or operating authority is implied.

   P-204
2. 02

   Check the source and revision

   Read model CHEM-P204-01 v0.1 and this draft identifier.

   Check The model and procedure versions match.

   P-204
3. 03

   Orient the assembly

   Locate the blue pump, grey motor and stationary coupling in 3D.

   Check Pump left, motor right; coupling remains stationary.

   P-204 M-204 C-204
4. 04

   Identify the correct guard

   Select G-204-A and compare its identity with the equipment record.

   Check G-204-A is distinct from the separate G-205-B spare.

   G-204-A G-205-B
5. 05

   Compare the mounting footprint

   Orbit the model and inspect the correct guard feet and fixed recessed pads.

   Check All four intended mounting locations are identifiable; geometry is illustrative.

   G-204-A
6. 06

   Locate the front pair

   Select CG-01, then CG-03, using the part picker or model.

   Check Both front identities are recorded separately.

   CG-01 CG-03
7. 07

   Inspect the rear pair

   Orbit to inspect CG-02 and CG-04.

   Check A front image is not treated as rear fastening evidence.

   CG-02 CG-04
8. 08

   Distinguish retained parts and tools

   Inspect the captive groups and separate keyed tool geometry.

   Check No threads, applied torque or continuous tool transfer are claimed.

   CG-01 CG-02 CG-03 CG-04
9. 09

   Explore assembly ownership

   Use the exploded inspection view to see which parts belong to the guard assembly.

   Check The view is an illustration of grouping, not an approved removal sequence.

   G-204-A C-204
10. 10

    Restore the assembled inspection view

    Reassemble the viewer and compare the source again.

    Check Correct guard identity and mounting context remain consistent.

    G-204-A
11. 11

    State the review decision

    Describe whether the supplied concept references are sufficient for the training example.

    Check Any unverified fit, clearance or retention requirement remains a review item.

    G-204-A
12. 12

    Prepare the receiving handover

    Link the configuration review to the receiving evidence draft.

    Check Guard review alone is not an operational release or a complete line-up record.

    P-204 L-204-D

Assessment and completion

Assess identity, front/rear pair recognition and the explanation of source limits. A simulated configuration score does not establish real fastening or readiness.

Draft for review and future Genesis authoring; not a published Chemicals simulator.

Product access and lesson status ↗